3 common mistakes to avoid with DIY tile and grout cleaning

When it comes to tile and grout cleaning, you’ve probably come across a whole variety of DIY cleaning methods. In this blog, we’re going to explore the most common mistakes that you should avoid with DIY tile and grout cleaning.

3 common mistakes to avoid with DIY tile and grout cleaning

1. Using the wrong cleaning products

One of the most common DIY tile and grout cleaning mistakes we see here at Wizard Cleaning® is homeowners using the wrong cleaning products on their tiles and grout. When it comes to tile and grout grout, there’s not really a one-size-fits-all approach. Choosing the cleaning product and method will depend largely on the type, colour and state of your tiles and grout.

Harsh chemicals like bleach or acidic cleaners can damage the grout, causing it to deteriorate or discolour. Even some all-purpose cleaners can be too abrasive. Instead, we always recommend going for a pH-neutral cleaner specifically designed for tile and grout. This will effectively remove dirt without compromising the integrity of your surfaces.

2. Scrubbing too hard

While it might seem like scrubbing harder will get your grout cleaner, it can actually cause damage. Aggressive scrubbing can wear down the grout which makes it even more porous and prone to staining. In addition to this, using rough brushes or abrasive pads can scratch the tiles.

In order to avoid this, we recommend using a soft brush and approaching it with a gentle circular motion. Having the right amount of patience as well as the right cleaning technique will achieve better results than brute force.

3. Overlooking the importance of rinsing

Another common DIY tile and grout cleaning mistake is failing to rinse the tiles and grout thoroughly after cleaning. You may not be fully aware of this, but leaving behind cleaning residues can attract more dirt and grime which eventually can lead to a dull and sticky finish.

Residues can also cause discolouration over time. This is why we always recommend to thoroughly rinse the area with clean water after scrubbing to ensure all cleaning agents have been removed. Taking the time to do this extra step will help maintain the cleanliness and appearance of your tile and grout.

By avoiding these common mistakes with DIY tile and grout cleaning, you can keep your surfaces looking pristine. If you’re ever worried that your tiles and grout are looking worse for wear and require some additional attention, then our friendly team at Wizard Tile & Grout Cleaning® are more than happy to assist. In order to get in contact with us, you can leave an enquiry HERE. Alternatively, you may also reach us on 0400 634 609.

Our Top Deals

Take a look at our irresistible offers listed below

Wizard Tile & Grout Cleaning® Special

Wizard Cleaning® offers a competitive rate of $7.50 per sqm. We also offer 3 standard rooms* Carpet Steam Cleaned FREE when you spend $250 on Tile Cleaning!

Wizard Carpet Cleaning® Special

Enjoy a FREE Rug Steam Clean with ALL Carpet Cleaning bookings.

Wizard Fabric and Upholstery Cleaning® Special

Have either 1 standard room* steam cleaned FREE or 1 rug Steam Cleaned FREE whenever you spend $160 on upholstery!

$160 (3 rooms)

One of Our Favourite Wizard Carpet Cleaning® Deals – 3 Rooms Steam Cleaned for $160!

$190 (4 rooms)

4 Rooms Steam Cleaned for $190!

$220 (5 rooms)

5 Rooms Steam Cleaned for $220!

Send us an email today

We’re here to help! Contact us with any cleaning needs.

Send us an email today

6-Year Award-Winning Carpet Cleaning Services

Wizard Cleaning® proudly celebrates six consecutive years of being recognised in the “Top 3 Carpet Cleaning Services in Perth.” This remarkable achievement is a tribute to the consistent high-quality work and dedication of our team.

Best Carpet cleaning service in Perth Best Carpet cleaning service in PerthBest Carpet cleaning service in Perth